Systema Gear Sets:
Helical Gear Set: The teeth that connect the sector gear and the spur gear are cut at an angle. This causes less stress on any one tooth because it has more teeth touching and spinning is not in an outward direction but into the gearbox. There is one exception to the helical gear set. You muct use a particular piston. The bevel gear has the teeth all the way around. The side of the gear that allows the piston to fire forward has one half the side of the teeth cut. So you have to use a piston that also has half the side of the teeth cut. The Helical Gear Set comes with the piston.
All Helical Gear Set: Has teeth cut at an angle on all of the gears. Also the bevel gear has the smooth side so it can be used with the original piston.
Flat Gear Set: Is cut with the original specs. These gears are made out of a denser metal and Teflon treated like the other gears.
High Speed Gear: Increases the rate of fire. Do not use a spring stiffer than M100. This gear also gives lower delay time between trigger pull and fire.
Standard Gear: Cut to original specs. Recommended to use a M120 or less due to the strain on the motor.
Torque Up Gear: Designed to be used with a M130 to M140 spring. All of the torque up gears will slow the rate of fire a little but reduce the strain on the motor caused by the gear. The greater the torque up the slower the rate of fire.
Super Torque Up: Designed to be used with a M140 to M150 spring.
Ultra Torque Up: Designed to be used with a M150 to M160 spring.
Infinite Torque Up: Designed to be used with a M160 to M200 spring.
|Systema Gear Sets|
|Mech box ver. 2&3||Strongest gear set with the most torque.|
|Mech box ver. 2&3||Surpasses even the super torque-up set, also reduces ROF.|
|Mech box ver. 2&3||Ultimate torque-up.|
|ZS-02-06||All Helical Gear Set I, Hi-Speed||Mech box ver. 2&3||Can Heighten operation speed, therefore more fire power.|
|ZS-02-07||All Helical Gear Set II, Standard||Mech box ver. 2&3||Swaps out original gears all at one time.|
|ZS-02-08||All Helical Gear Set III, Torque-up||Mech box ver. 2&3||Torque-up type for custom guns with stiffer spring.|
|ZS-02-09||All Helical Gear Set IV, Super Torque-up||Mech box ver. 2&3||Reduces rotation speed to produced more torque, so stiffer springs can be used safely.|
|ZS-02-15||All Helical Gear Full Set I, Hi-Speed||Mech box ver. 2&3||Hi-speed helical gears, full set.|
|ZS-02-16||All Helical Gear Full Set II, Standard||Mech box ver. 2&3||Standard helical gears, full set.|
|ZS-02-17||All Helical Gear Full Set III, Torque-up||Mech box ver. 2&3||Torque-up helical gears, full set.|
|ZS-02-18||All Helical Gear Full Set IV, Super Torque-up||Mech box ver. 2&3||Super torque-up helical gears, full set.|
|Special All Helical Gear Set, Super Torque-up||Mech box ver. 2&3||Special super torque-up helical gears.|
|ZS-02-10||Flat Gear Set I, Standard||Mech box ver. 2&3||Low price replacements for original gears. Great for beginners to experiment with.|
|ZS-02-11||Flat Gear Set II, Hi-Speed||Mech box ver. 2&3||Replaces original gears for better ROF.|
|ZS-02-12||Flat Gear Set III, Torque-up||Mech box ver. 2&3||For use with more powerful springs.|
|ZS-02-13||Flat Gear Set IV, Super Torque-up||Mech box ver. 2&3||Highest torque in the flat gear set group.|
|ZS-02-20||Flat Gear Set FAMAS, Standard||FAMAS only||Standard torque in the flat gear set group.|
|ZS-02-21||Flat Gear Set FAMAS, Hi-Speed||FAMAS only||Replaces stock gears for better ROF.|
|ZS-02-22||Flat Gear Set FAMAS, Torque-up||FAMAS only||For use with more powerful springs.|
|ZS-02-23||Flat Gear Set FAMAS, Super Torque-up||FAMAS only||Highest torque in the flat gear set group.|