Published on 13:46 September 8, 2008 .
LT MAC has sent in an update regarding OP:Liberty Canyon:
REGISTRATION DEADLINE IS SEPTEMBER 20 FOR OP: Liberty Canyon HELICOPTER INSERTION AND GAME UNIFORMS
The Operation Liberty Canyon registration deadline for insertion by helicopter, game uniforms, and any other pre game logistical coordination is SEPTEMBER 20TH. Please register at the Battlesim web site.
We will accept walk on players up to 10AM on September 27th but you will not have access to the helicopter, or the game uniforms, and you will have to pay a $10 late registration fee. Players playing late cannot be squad leaders as we need to coordinate with them before the event.
Reminder: The event is not at the Wolcott Hobby Shop – it is at an offsite location. You will need to have all the equipment you need for 24 hours of operation with you and in you backpack. If you do not have a pack one will be issued to you but you must register before September 20th. There is a packing list available for registered combatants.
The game timeline is as follows:
September 27
0900 – NVA / VC registration opens at Wolcott Hobby Shop
1000 – US Forces registration open at Wolcott Hobby
1030 – Helicopter safety briefing
1100 – Helicopter insertions begin
1300 – Helicopter insertions end – all players will be in the Area of Operation
September 28
1200 – Tactical operations end
1230 – After Action Review for all participants
1330 – Transportation back to Wolcott Hobby
Registration is your key to being prepared for this operation.
Once you register you will be contacted by the Battlesim staff so that you may gain access to the private forums on VIETNAM AIRSOFT http://www.vietnamairsoft.com where both sides have pre mission planning materials. You can ask you commanders questions and we will be organizing the squad leaders, RTOs, and individual combatants.
Address for registration and helicopter LZ:
Wolcott Hobby and Airsoft
1254 Wolcott Road
Wolcott, Conneticutt 06716
Phone: 203-879-7766
Published on 13:42 September 8, 2008 .
Tomo mailed in to say that some new t-shirts have arrived:
Dear Sirs.
Today we got new T-Shirts from Asuka Sewing Factory, IT’s called "AVTOMAT T-Shirts". Used 6.2oz Heavy weight Shirts.
Now we got 4 colours, Afgan Earth, Natural, Brown & Charcoal Gray.
Thanks !
PDI Co.,Ltd. Sales Manager
Tomohiko Nishizono
Published on 13:39 September 8, 2008 .
From Simon, MAX Tactical muzzle cap in Afghanistan:
Some photos here.
You can purchase the toy one from ECHO1USA too.
More product information link. (HSS International)
Published on 13:34 September 8, 2008 .
Bolle Tactical eyewear is now available at www.tactical-kit.co.uk.
Bolle T 800 Tactical Goggles is a Ballistic Goggle designed for long term use and helmet compatibility. Military / Tactical Bolle T-800 Goggles design features allow for exceptional peripheral vision and comfortable fit. Bolle T-800 Ballistic Goggles black frame 100800110 is constructed of impact resistent "Zytel" and a special "bi-raw material" contruction process bonds to the interior sections and allows for a soft comfortable fit without the use of foam. Interior sections of Bolle T800 Tactical Goggles frame that seal to the face are made of an anti-allergenic elastomer rubber.
High impact Bolle T-800 Goggles 2.2 mm polycarbonate Replacement Lens of Bolle T 800 R Goggles is anti-fog coated on the interior and anti-scratch coated on the exterior and provides 100% UV absorption. The nylon back strap of T 800 Bolle Tactical Goggle is 35 mm wide and is 73 mm long. T-800 Bolle Tactical Goggles has an elastic extension of 160% allowing easy use with a helmet. Bolle T 800 Tactical Goggles are currently in use by U.S. Special Forces, Navy Seals, Army Rangers and many municipal SWAT Teams.
Bolle T800 Tactical Goggle Frame
- Impact resistant Zytel and elastomer rubber
Bolle T-800 Military Goggle Lens
- Single 2.2 mm polycarbonate
Kind regards, Ian, (Tactical Kit)
Published on 12:42 September 8, 2008 .
Exciting news from King Arms involving their latest release:
The first phase of the KA AEGs planning is done, and now is the time for me to introduce you all the first AEG of our second phase. King Arms is proudly present you our newest AEG, the Galil SAR. Being one of the most famous rifles derived from the AK series, Galil has been known as a very robust rifle with high reliability in difficult and extreme conditions. We intended to bring you the best, and we did. The Galil SAR is produced under official license from the Israel Weapon Industries (IWI) Ltd.* All markings will be available with as much details close to the real firearm as possible.
Here come some of the highlighted details of the AEG:
- Official licensed product* (was Israel Military Industries Ltd.; Trademark of UZI Brands International Ltd, used by permission of Cybergun)
- Limited Edition: 500 pieces
- 1:1 precise dimensions and specs
- Full metal AEG with tons of steel parts
- 7mm bearing gearbox
- Special designed Bolt Carrier Operating System (Patent Pending)
- Dummy left-side selector
- Semi/Auto Firing
- 9.6-12V capable
- 130R steel magazine
- Betalight Ready (equipped with Tritium night sights set, betalight not included, modification needed.)
There is a little preview for you all:
The AEG will be available by the end of September. Please contact KA for more details. Enjoy! Mark Ng, (King Arms)
Published on 20:32 September 6, 2008 .
Here’s the latest from PDI/X-Fire:
Dear Sirs.
Today’s news is New clothing by Asuka Sewing Factory. Shalwar Kameez Twill.
This has 2 colors. Burn & Ambush. (Above is just sample getting Shalwar.)
The other item is CS Ring Hammer for TM MEU.
Now we don’t update in English site but if you have an interest ,please access to Japanese page. Some pictures are in there.
BEST REGARDS
PDI Co.,Ltd.
Sales Manager
Tomohiko Nishizono
Published on 22:01 September 5, 2008 .
Airsoft GI have posted in their latest:
Airsoft GI has undergone a bit of maintenance the past few days, and we are happy to announce that all is well. You me have experience slow page loads and a few error message when accessing www.airsoftgi.com but these issues have been solved and you can now continue to use the website without any issues.
On a much brighter note, we have a lot of brand new products available that you absolutely must see.
First up the new Top Tech M4A1 Blowback AEG. This blowback system is different from those currently on the market. Instead of using a mechanical system run by the gears, this blowback employs the air movement from the cylinder to power the bolt. The end result is a much simpler design, with less moving parts; which should prove to be more reliable than the current mechanical design.
Exclusively available at Airsoft GI, the KWA M16 A4 RIS. Rail systems are great for increasing the upgrade potential of your primary, especially one as long as this one. The rock solid KWA gearbox combined with the full length rail system makes the KWA M16 A4 RIS the all around AEG, perfect for anyone arsenal.
Brand new from JG, the AUG A3, is sure to excite the bullpup fan community. The full metal RIS on the front of the A3 balances the looks and weight of the AUG, not to mention adds a lot of rail space for adding accessories.
That’s not all, be sure to visit www.airsoftgi.com for even more exciting new products.
(Airsoft GI)
