Jump to content


Photo
- - - - -

Polarstar Fusion V3 Prototype

Polarstar Fusion Gearbox Version 3 HPA

This topic has been archived. This means that you cannot reply to this topic.
45 replies to this topic

#1 sniperelite7

sniperelite7

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 222 posts

Posted 04 January 2012 - 01:01 AM

Polarstar has released a new video showing off the new version 3 fusion prototype in an AK.



#2 adadqgg

adadqgg

    This knife cannot hurt you if you believe

  • Banned
  • PipPipPipPip
  • 943 posts

Posted 04 January 2012 - 02:15 AM

It is not just AK.

It is the RealSword Type 56...

That means they made it fit the slightly shorter gearbox/receiver.

What seems to be the real issue here is that they forgot to put on the selector switch.

Edited by adadqgg, 04 January 2012 - 02:17 AM.

Posted Image

#3 aznriptide859

aznriptide859

    YOUR POST GAVE ME CANCER.

  • Commercial User
  • PipPipPipPip
  • 4,774 posts

Posted 04 January 2012 - 02:24 AM

That is an issue...if it only works for T56's then it won't work for all other AK's.

Which sucks.

IMG_6423.jpg

 

Interested in R-Hop's and other custom work? Visit HS5 Armory! https://sites.google.com/site/hsarmory/

 

Need an extremely reliable MOSFET for your AEG? Check out BTC Airsoft! http://www.btcairsoft.com/

 

 


#4 Tom Andrews

Tom Andrews

    Regular Poster

  • Forum Regular
  • PipPipPipPip
  • 3,113 posts

Posted 04 January 2012 - 02:25 AM

Plus no trigger.....................
For every gun you sell and do not replace, a little kitten is placed into a woodchipper.

#5 Zombie00

Zombie00

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 300 posts

Posted 04 January 2012 - 02:33 AM

Plus no trigger.....................


Prototype.
Still fail to see what so good about this thing. I know N2 is consistent and all that, but having a canister at my back is a no-go for me. I played PB for a couple of years and I'm not going back to the remote lines and all that. Gas could only be appealing with blowback (and even with a good BB effect I still would steer clear from ever again carrying that thing at my back with a hose coming from the grip of my gun).
 

well I have to say I do not like the m16/m4's because everybody has it, and the realsteal version is ###### as well
it never gits the job done with the first shot it can take up to 5 shots to take down a terrorst reason being it was
designed for jungle warfare and it was ok for that, but when it comes to desert warfare and terrorst its ######.


OMG...

#6 MegaMan3k

MegaMan3k

    Member

  • Members
  • PipPip
  • 12 posts

Posted 04 January 2012 - 02:40 AM

I'm still holding out for the M240 kit....

#7 bnoji

bnoji

    Adv Member

  • Members
  • PipPipPip
  • 33 posts

Posted 04 January 2012 - 02:58 AM

That is an issue...if it only works for T56's then it won't work for all other AK's.

Which sucks.


Jordan has taken that into account. It's easier to fit the smallest space first, then add on to fill a larger space.

#8 sniperelite7

sniperelite7

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 222 posts

Posted 04 January 2012 - 03:35 AM

Prototype.
Still fail to see what so good about this thing. I know N2 is consistent and all that, but having a canister at my back is a no-go for me. I played PB for a couple of years and I'm not going back to the remote lines and all that. Gas could only be appealing with blowback (and even with a good BB effect I still would steer clear from ever again carrying that thing at my back with a hose coming from the grip of my gun).


They've been a hit here in the states from what I could tell. The canister on my back hasn't bothered me one bit.

#9 J.J.Simpson

J.J.Simpson

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 197 posts

Posted 04 January 2012 - 03:53 PM

A do it yourself kit for M249 (and upcoming PKM) would be awsome :)
S8PMC Airsoft team Lithuania - our team, news from the world, local airsoft news!
www.s8pmc.eu

#10 Horsem4n

Horsem4n

    Visualizes rails on EVERYTHING

  • Commercial User
  • PipPipPipPip
  • 2,981 posts

Posted 04 January 2012 - 06:41 PM

you can still order 249 drop in boxes from them directly i believe.

The TM man said "One day child you will look and see that the sun has risen and with it came the dawning of the TM M&P and HK45 and life will be good"
 
Attendant "But KSC and WE have already given us these things"
 
TM man slowly turns looks the attendant in the eyes and slowly but quite surely pulls the man's still beating heart out of his chest ... "we do not speak of the yapping noise that the little dog companies make"
 
 
Legit that is what was said / happened.


#11 uscmCorps

uscmCorps

    Have gun - will travel

  • Forum Regular
  • PipPipPipPip
  • 5,902 posts

Posted 04 January 2012 - 07:56 PM

I guess I'm missing the point as to why this is preferable over an AEG? Anyone?

#12 FELDJAGER

FELDJAGER

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 539 posts

Posted 04 January 2012 - 08:05 PM

pretty much instant trigger response, less moving parts to break, and apparently easy to get running in high velocity/high rof setups. At least, those are the reasons im looking into it for a G3 DMR.

#13 Sallinen

Sallinen

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 217 posts

Posted 04 January 2012 - 08:38 PM

Superior reliability, superior performance, superior adaptability, just to name a few superiors.
It is time to move on from the traditional mechboxes. Old technology and it is time to make new, better designs.

Airsofter since 2006ish. GBB FTW!

 


#14 Rob15

Rob15

    Rob>KABOOM!<15

  • Global Moderators
  • 6,213 posts

Posted 04 January 2012 - 08:49 PM

Superior reliability, superior performance, superior adaptability, just to name a few superiors.
It is time to move on from the traditional mechboxes. Old technology and it is time to make new, better designs.

Most players won't go for that though, I for example do not want to have to carry a HPA bottle or have the expense/hassle of sorting out a decent HPA bottle, regulator and then refills even though I don't mind the idea of having a hose.

The Polarstar system could be the best thing in the world of airsoft ever, but it's still destined to be a niche item worldwide.

Well, I cant see a customs person really going "Oh dear, that looks like a banana mag and its not an AK mag... CALL THE UMAREX HOTLINE!"...somewhere in germany, a lawyer picks up a red flashing plastic phone, V1s are launched at your house...etc etc


OP Morning After 6.5, You don't know man, You weren't there!
Posted Image

Lees Precision Engineering - Airsoft Products Designed & Manufactured In The United Kingdom


#15 harborne blue

harborne blue

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 894 posts

Posted 04 January 2012 - 09:11 PM

Superior reliability, superior performance, superior adaptability, just to name a few superiors.
It is time to move on from the traditional mechboxes. Old technology and it is time to make new, better designs.


I think you'll find that Marui have done that with the Recoil Shock AEGs. If the Polarstar takes off and even comes close to challenging the gas-in-mag GBBRs then I'll be very surprised. Why lug around a load of extra kit, at extra cost to be able to perform as well as a $400 AEG? Not for me, I'm afraid.

When the pin has been pulled, Mr Grenade is no longer our friend...
------------------------------------------------------------------------------------------------------------
Omnes una manet nox - Omnes vulnerant, ultima necat

I won't sit down, I won't shut up and most of all, I will not grow up!


#16 Zombie00

Zombie00

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 300 posts

Posted 04 January 2012 - 09:51 PM

I think you'll find that Marui have done that with the Recoil Shock AEGs. If the Polarstar takes off and even comes close to challenging the gas-in-mag GBBRs then I'll be very surprised. Why lug around a load of extra kit, at extra cost to be able to perform as well as a $400 AEG? Not for me, I'm afraid.


Well, TM might work for you with your FPS limits, but that isn't true for other Airsoft communities like USA, some eastern Europe countries and, I believe, Hong Kong were the FPS limits are either high or none existent. No matter how good the hop-up is, the FPS are still an important factor (pushing heavier bbs, getting your shot through soft cover, etc).

Still, I'm one of those how prefer guns that shoot below 18-20 RPS and my local rule-set doesn't allow me to go over 400FPS for assault rifles. Reliability hasn't been an issue so far and N2 isn't as easy to come by over here as it might be on North America.
This is obviously a niche product, not an Airsoft revolution like TM Aegs. Plus, it's expensive, how much would it cost to have LCT externals with this system inside (plus the N2 canister, the hose and, probably, a regulator)?.
 

well I have to say I do not like the m16/m4's because everybody has it, and the realsteal version is ###### as well
it never gits the job done with the first shot it can take up to 5 shots to take down a terrorst reason being it was
designed for jungle warfare and it was ok for that, but when it comes to desert warfare and terrorst its ######.


OMG...

#17 adadqgg

adadqgg

    This knife cannot hurt you if you believe

  • Banned
  • PipPipPipPip
  • 943 posts

Posted 04 January 2012 - 11:13 PM

This has its market.

I just do not see TM recoil unit working well past 30rps.

And the most important thing here is that the air rig pretty much got rid of motor windup time and sewing machine sound.

I would not use air rig where/when I play airsoft; nor would I want over 20rps...but one of these with reasonable rps is fine.
Posted Image

#18 Rob15

Rob15

    Rob>KABOOM!<15

  • Global Moderators
  • 6,213 posts

Posted 04 January 2012 - 11:38 PM

It does seem it's market is in countries with either a cold climate or where AEGs regually get pushed to/close to their limits, in those areas the Polarstar system makes perfect sense, very cold temperatures reduce the lifespan of gearbox shells and for the very high fps markets it almost certainly will be more reliable than any AEG.

For those who are saying 'why do we need outdated gearboxes anymore' I'd say this, gearboxes are a well proven design, granted with known flaws that largely people have found ways to get around, ie, Mosfets. Gearboxes themselves are very cheap, in the last few years decent quality gearbox parts have become cheaper and easier to get hold of, they're easy to repair at home using these readily available cheap parts when they go wrong and only need a motor and battery adding which have also come down in price. Batteries particually have come down a lot, back in 2005 to get 2400mAh in mini-pack sizes needed at least 2 batteries costing around £40 - £60, now you can get a single lipo for £16 here in the UK of that capacity, far cheaper than any HPA rig and like gearbox repairs, recharging can be done at home with low cost equipment.

Finally, at fps levels around 400fps at a sensible ROF or less it is perfectly possible to have a gearbox running reliably and consistantly for a considerable period of time at a fairly low cost, even a cheap gearbox with poor tolerances at UK fps levels can run for an impressive amount of time before failing and that is why they still have a place and won't be going anywhere anytime soon.

Well, I cant see a customs person really going "Oh dear, that looks like a banana mag and its not an AK mag... CALL THE UMAREX HOTLINE!"...somewhere in germany, a lawyer picks up a red flashing plastic phone, V1s are launched at your house...etc etc


OP Morning After 6.5, You don't know man, You weren't there!
Posted Image

Lees Precision Engineering - Airsoft Products Designed & Manufactured In The United Kingdom


#19 Horsem4n

Horsem4n

    Visualizes rails on EVERYTHING

  • Commercial User
  • PipPipPipPip
  • 2,981 posts

Posted 05 January 2012 - 12:36 AM

The point of the system is flexibility with reliability at all 4 ends of the spectrum. You just need to set up one gun that will work at every field you bring it to without having to tear it down between games for changes of building multiple guns.

I live in the north east USA. A place where all sorts of fields are. I have out door fields with normal fps limits for the us and thr out door fields with limits a bit higher and others that are larger and I could take on a DMR role where I was in a rifleman role last game. I have cqb fields that are strict 350 fps and semi only, others that allow full auto from building to building and others that allow full auto when you shoot less than 300 fps.

I can take the same gun to all those fields with no problems at the chrono.

The thing about it is that even P* admits its a niche product. But, with anything you want to sell, you have to market to everyone and that makes it look like they are saying that its for everyone. So, my point is only to put forward the reason for creation (flexibility) and to stop everyone from arguing about how useful it is.

If you need flexible kit and find yourself building lots of guns for different purposes, get one of these things. That is, unless you have an irrational hatred for tubes coming from the grip or you don't wear a lot of kit and don't want to bare the weight of the rig (all 3 pounds of it) all day.

The TM man said "One day child you will look and see that the sun has risen and with it came the dawning of the TM M&P and HK45 and life will be good"
 
Attendant "But KSC and WE have already given us these things"
 
TM man slowly turns looks the attendant in the eyes and slowly but quite surely pulls the man's still beating heart out of his chest ... "we do not speak of the yapping noise that the little dog companies make"
 
 
Legit that is what was said / happened.


#20 Zombie00

Zombie00

    Regular Poster

  • Regular Poster
  • PipPipPipPip
  • 300 posts

Posted 05 January 2012 - 02:56 AM

In my modest opinion is better to either have several guns (in variety lays the taste they say, so no Cqb M4, assault M4 and DMR M4) or even stick to one play-style regardless of the environment you're playing in (except for those CQB hangar sites you have in the states) and compensate with a pistol or a small AEG/GBBR (i.e.:Mp5k/Mp7). The transition from one gun to the other is also part of the fun. But maybe that's just me.
 

well I have to say I do not like the m16/m4's because everybody has it, and the realsteal version is ###### as well
it never gits the job done with the first shot it can take up to 5 shots to take down a terrorst reason being it was
designed for jungle warfare and it was ok for that, but when it comes to desert warfare and terrorst its ######.


OMG...




Site Meter