24 replies to this topic

[Shift]

So I was looking through E Hobby asia and I found this:
http://shop.ehobbyasia.com/accessories/conversion-kit/for-aegs/pas-co2-conversion-kit-for-aandk-svd-sniper-rifle.html

It came up all of a sudden and I haven't heard any prior news of it before.

I thought you russian gear guys might like this. I know my local AK lover will.

Please delete if this has already been mentioned else where.

[ninja master of coffee]

$135 for a somewhat easier pull... I don't see too much of a point in this, now if it was a semi-auto drop in kit...

[adadqgg]

^Daytona gun can do it.

[Rob15]

If you watch the video the consistancy seems to be rubbish, one shot at 425fps and the next 550fps! Nice idea but in practice it doesn't look that great.

[Fighting Maus]

Would this fit the A to Z cargo SVD? I saw no need to purchase an A & K SVD which essentially is a clone of the A to Z.

Regarding the chrono results; I saw the varience as well, but out of 5 or so shots only the first was 450 or so. All the rest were in the 500s. Too hot for our field unfortunetly.

Edited by Fighting Maus, 12 December 2010 - 09:39 PM.

[L85FREAK]

Kind of cool, still wish it would make it semi auto though... As for consistency, it did seem fairly consistent after the first shot

[WhiteHawksan]

there was only a 7fps variance across the spread. I would like to see another couple of bulbs through it to see if its a first shot with EVERY bulb or just because it was an odd shot.

[ultimentra]

Will probably make reloading a pain if the bulb only lasts one mag.

[Wingmann]

Same gadget but green gas reloadable and with adjustable valve for that price, yes.

[bjorn]

Since the CO2 is only used for shooting the bb and not on any blowback, I assume it should be sufficient for over a 100 shots or so.

B.

[DangerWerx]

Since the CO2 is only used for shooting the bb and not on any blowback, I assume it should be sufficient for over a 100 shots or so.

B.

Agreed.

Shot count will probably be better than tanaka users using 12 gram rigs.

[adadqgg]

I realized that this is probably for adding an external rig to A&K.

[helix]

I would like to think that the first shot may have ricochet inside the tube which may have caused the drop in fps for the first shot but remained consistent for the rest of the shots. Happened to me once using the same model chrony

As for the kit, seems to be an easy way to make a gas sniper. My question is how is the range and accuracy?

[SpecialistR]

Well hows the barrel/hop-up on the A&K?
The link hasnt worked for me so I dont know if it replaces the hop.

[Scout03]

This conversion looks good and consistent,

How ever i Hope they make a under 500fps Version

Edited by Scout03, 14 December 2010 - 02:05 PM.

[wolfgeorge]

I think it's great upgrade first of all you get light bolt pull and high fps as for consistency I don't know what happenend to that first shot but the rest are very good with small variation between the shots

[Wingmann]

I'm yet to hear word about how to control the FPS on this. I have two theories: One using a softer main spring, two using a harder valve spring.

[LordElpus]

Might be able to do it by drilling some small holes in the nozzle so there is some air leakage.

[Scout03]

Might be able to do it by drilling some small holes in the nozzle so there is some air leakage.

wouldnt that make it a lot less consistant as the air would travel the path of lest resistance

[LordElpus]

the alternative is not being able to use it in the uk.

Honestly, you would be better off buying a tweaking a RealSword SVD over getting the co2 kit and a a&k svd.

or buy a archery finger guard and built up those arm muscles.