12 replies to this topic

[lance201]

Hello,

found this at redwolf airsoft:



http://redwolfairsoft.com/redwolf/airsoft/Classic_Rifles_Marushin_Marushin_M1_Carbine_Short_Magazine_Version_6mm_BB_Version.htm

I am the only one who thinks the mag is looking weird?



Lance

[renegadecow]

The magazine tapers out from the magwell making for a thicker overall magazine. This is because they've used the same short magazine body as with their CDX M1 Carbine which uses CO2 powerlets (which needs that extra thickness to fit the powerlet). What's strange is that Redwolfs description is of the old NBB M1 carbine and the price is much lower from Marushins msrp which is ¥36,800.

[blablabla]

So is the Umarex version the same as this one ? Cuz I'm getting confused...
Didn't know that Marushin did them in 6 mm to

Edited by blablabla, 26 March 2012 - 04:27 PM.

[harborne blue]

Marushin make the original, everyone else essentially clones this. The ASG version takes the Marushin mags, for example.

[killen_med_skorna]

Is the costruction (of the clones) still as weak as the original?

[Wingmann]

Might this be the CDX version?
I doubt Marushin has released a GG magazine of that size when they already had HFC134A mags made.

[renegadecow]

That's not the CDX. CDX should have an msrp of around $440 and it should say CO2. Marushin did have a proper looking short mag, but was not for the GBB M1. They were for the NBB version as the GBB only had long mags made for it.

[Wingmann]

From the info I've collected around, it's the NBB version with a HFC134A magazine.

[Bjerre]

Marushin make the original, everyone else essentially clones this. The ASG version takes the Marushin mags, for example.

The ASG version is made by Marushin - not a clone...
http://www.actionsportgames.com/products-search-248.aspx?productid=17134@@SHOP1

See the brand and the 3rd pictures of the box - Right lower corner.

///Bjerre

[lance201]

It is NOT with CO2-mags, look here:

http://shop.ehobbyasia.com/catalog/product/view/id/23403/s/marushin-us-m1-carbine-6mm-maxi-short-magazine-version/?___SID=U



But I think this are the CO2 Mags, just with a "normal" gas conversion...

Lance

[Wingmann]

But I think this are the CO2 Mags, just with a "normal" gas conversion...

From the info I've collected around, it's the NBB version with a HFC134A magazine.

It's confirmed then

[lance201]

also ehobby says: Blowback: YES!

Lance

[Wingmann]

It also says this: Movable Bolt Action to load the first round.

I would be careful with that. They usually copy the descriptions from other similar guns and mess it up.