Jump to content

G36 Picture Thread


Recommended Posts

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

A thing to do to minimize the poor eye relief issue with the scope is to keep the "c" stock, instead of the "K" or "E". Just like Devilhunter did it seems.

 

I have almost every replica G36 scope, and I have had eye relief issuse with all of them. It didnt matter what length of shoulder stock I was using. I don't have a real deal hensolt so I can't speak to that, but the replica is a piece of ######. As shown below, I use a replica ELCAN. It is the only scope I have found that I can use with goggles. The 80.00 price can't be beat. The reticule is the 3 post design, and it has 4x magnification. I can watch the plastic fly to the target. ;)

 

G36C%20.JPG

 

G36K%20Hybrid.JPG

 

G36K%20and%20Launcher.JPG

 

Link to post
Share on other sites
The real deal is ###### aswell is it?

 

 

Its ok,the only RS optics I can compare it to which is similar is the aimpoint - which has alot better eye relief, and the susat, which isn't great in eye relief terms. Its (g36 site unit) certainly alot better then the airsoft version but given the price that should be a given!

Edited by Skarclaw
Link to post
Share on other sites

My Classic Army G36K

 

G36K-2.jpg

 

Still to do...

-custom cut to KSK rail

-Echo1 DBAL battery box

ALL of the internals (this thing came as a bit of a wreck)

-Systema Magnum motor

-M110 spring

-tightbore barrel (the one it came with was too long)

-metal hopup unit

-metal charging handle

 

I hope you like it! Sorry for the awful picture, I had to use my cell phone.

Edited by validtumoralarm
Link to post
Share on other sites

looks good, i would caution against using a metal hopup, there really isnt any advantage and certain companies (SRC :angry: ) have the hopup unit and feed tube as one piece which forces you to cut the feed tube that is molded into the magwell. btw do you play down at crown valley?

Link to post
Share on other sites
looks good, i would caution against using a metal hopup, there really isnt any advantage and certain companies (SRC :angry: ) have the hopup unit and feed tube as one piece which forces you to cut the feed tube that is molded into the magwell. btw do you play down at crown valley?

 

I was just going to use the Classic Army one since I have to change it out anyway.

 

Yeah, play at CV. You wouldn't happen to be Germany, would you?

Link to post
Share on other sites

Its made by star, I got mine from UNCo. It also has no sights so the rail runs the full length.

 

Would anybody be interested in getting a custom run of ksk handle replicas made? I've got the dimensions and I'm pretty sure its something that wouldn't be to hard to machine - especially at a professional level. It would be pretty expensive if you did it individually but if there was a group the costs could be cut.

Link to post
Share on other sites
Heck yeah!

 

As long as they're cheaper than 175 EUR, which is what a real KSK handle goes for.

 

My team mates would probably be interested as well, though it would have to be 100% correct.

 

Hello guys, sorry if this is the wrong place to post, but allready posted in the tech section, with very little help. I need some info on which cylinder and piston and head to use in a Classic Army G36C and what brands are compatable with CA! Please reply.

 

http://www.arniesairsoft.co.uk/forums/inde...p;#entry1981951

Thanks

Pierre

 

 

 

Link to post
Share on other sites
Its made by star, I got mine from UNCo. It also has no sights so the rail runs the full length.

 

Would anybody be interested in getting a custom run of ksk handle replicas made? I've got the dimensions and I'm pretty sure its something that wouldn't be to hard to machine - especially at a professional level. It would be pretty expensive if you did it individually but if there was a group the costs could be cut.

 

yep, count me in too.

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.