Blink43va Posted December 29, 2007 Report Share Posted December 29, 2007 Hey guys, I have bought a TM AK, and want to build an AIMS using the TM as a base! Basically I have a rough understanding of what I need. However, I am having a hard time finding a coat hanger folding stock for it... I have looked everywhere for one. I will either go with a Inokatsu Steel Receiver set (seen here: http://redwolfairsoft.com/redwolf/airsoft/...l?prodID=21392) or a King Arms Metal Body w/ Grip (seen here: http://redwolfairsoft.com/redwolf/airsoft/...l?prodID=21912) I will also get a King Arms AK74 style cover if I go with the King Arms set! I am gunna keep the TM front end and mod it into the needed appearance shape, with the help of a fellow Comrade who knows alot about that area! So what else do I need to make a propper Rommy AIMS AEG? Thanks, -Blink Link to post Share on other sites
mightyjebus Posted December 29, 2007 Report Share Posted December 29, 2007 here is a folding stock http://www.rsov.com/product_info.php?cPath...products_id=946 buy this receiver set: http://www.rsov.com/product_info.php?cPath...products_id=381 buy this pistol grip: http://www.rsov.com/product_info.php?cPath...roducts_id=1130 buy this wooden furniture: http://www.rsov.com/product_info.php?cPath...products_id=945 speak to Ting at russain mania workshop and he will sell you the AKM style gas part. once you have all the bits you need to do the following: remove both tangs from back on elements receiver and fit the folding stock. remove 2mm from the front of the elements ribbed top cover to fit. mod wooden lower grip to fit elements receiver. dremmel AKM gas part to fit in TM gas part.(you will need to cut off the Ak47 style one at the joint). and when you have done all that you should have something like this:(this is a 74 style AIMS but the only difference is the front sight and flash hider) Link to post Share on other sites
Blink43va Posted December 29, 2007 Author Report Share Posted December 29, 2007 Awesome! One question though. When you say "remove both tangs from back on elements receiver and fit the folding stock", what do you mean by that? Are you saying to cut the tangs off fully? How does the folding stock attach then? I am just curious as I have never dealt with a stock like this one! Also, what is the AKM gas part exactly called? Thanks so much for your help mightyjebus! -Blink Link to post Share on other sites
colonel_kipper Posted December 30, 2007 Report Share Posted December 30, 2007 Yes, you remove them fully : Cheers, Ed. Link to post Share on other sites
Blink43va Posted December 30, 2007 Author Report Share Posted December 30, 2007 Great, that makes it super easy to know how to do it! Thanks, -Blink Link to post Share on other sites
iloveics Posted December 30, 2007 Report Share Posted December 30, 2007 http://airsoftglobal.com/advanced_search_r...ywords=romanian Link to post Share on other sites
Blink43va Posted January 1, 2008 Author Report Share Posted January 1, 2008 Thanks iloveics, Would that stock on Airsoft Global be the same as the one that RSOV carries? I need to find a place in the US preferably, but if not, ill just go with that or RSOV. Thanks again guys, -Blink Link to post Share on other sites
iloveics Posted January 1, 2008 Report Share Posted January 1, 2008 I'm not sure if it would be exactly the same, But it would fit the same way. Link to post Share on other sites
GRIM! Posted January 1, 2008 Report Share Posted January 1, 2008 To use a AK47 as base wasent to good to start with you should have got a CYMA AKM for example, but you allready got the AK47 but get the parts jebus said, but i would higly recomend a RMW reciver, first that the stock is allready installed and the reciver is same quality as Guarder/Inokatsu since its the same maker of it, if you think its to expensive just get the RMW AKM reciver cus the ACM AKM reciver sux *albatross*. So heres the one with sidefolding stock allready installed http://www.russianmaniaworkshop.com/detail...M-03&cat=11 And only reciver http://www.russianmaniaworkshop.com/detail...M-05&cat=11 Now you should also get AKM gasblock and frontsight since AK47 have difrent from the AKM and if you keep the ak47 parts you will just end up looking like a AK newb, since you live in the states you should get ahold of those parts pretty easy and also a real pair of romanian handguards and then you will also have youreself a uniqe ak with RS parts aswell! Link to post Share on other sites
iloveics Posted January 1, 2008 Report Share Posted January 1, 2008 I would be curious as to where you can get AKM front sights etc, Wouldn't mind one for my ak. Bare in mind its a TM. RMW used to stock them Link to post Share on other sites
GRIM! Posted January 1, 2008 Report Share Posted January 1, 2008 I dont think there are any, but real ones should be best. Link to post Share on other sites
ECRRRainman Posted January 18, 2008 Report Share Posted January 18, 2008 Sorry to somewhat rezz an oldish topic, but I had a question about the Romanian stock modding. Can this be done to an Inokatsu AIM? or any other full stocked AK for that matter? or is this specific mod technique limited to the element body? Link to post Share on other sites
iloveics Posted January 19, 2008 Report Share Posted January 19, 2008 You probably could mod the AIM reciever, The technique shown earlier in the diagram is for 99% of TM compatible bodys. Anything can be modded, I have a romy stock on my G&P ak47 reciever, which did have fixed stock tangs. Was a mission, but i made the romy stock fit with a hacksaw and a chisel. That element metal body IS for full stocked ak's. its just missing the stock tangs which are normally seperate. Link to post Share on other sites
ECRRRainman Posted February 15, 2008 Report Share Posted February 15, 2008 Hey folks, another question about this stock mod, to anyone who has done this can you tell me how sturdy it is? Link to post Share on other sites
mightyjebus Posted February 16, 2008 Report Share Posted February 16, 2008 in one word...very Link to post Share on other sites
mrblah Posted February 17, 2008 Report Share Posted February 17, 2008 i had a inokatsu AIM, and i found that the angle at the rear of the receiver to be off (slanted like a old ak receiver), so when I put on a real romanian stock, it was slanted. I couldn't figure out how to correct this ( i did this after i cut the tangs off, and modded the romanian wire stock). That was the main reason why my AIMS project was put off indefinitely, and sitting in a million pieces. Anybody got any ideas how to get around this without buying a new receiver. Link to post Share on other sites
ECRRRainman Posted February 17, 2008 Report Share Posted February 17, 2008 Mrblah can you perhaps take a picture of your AIM receiver so I could maybe see the difference between normal receivers and the Inokatsu one? I now a little nervous because I was planning on purchasing and modding an Inokatsu receiver sometime in the future Link to post Share on other sites
mrblah Posted February 17, 2008 Report Share Posted February 17, 2008 not til wednesday, i'm out of town again until then, but ill post a pic then Link to post Share on other sites
ECRRRainman Posted February 17, 2008 Report Share Posted February 17, 2008 thanks! Link to post Share on other sites
darryl zero Posted April 3, 2008 Report Share Posted April 3, 2008 i had a inokatsu AIM, and i found that the angle at the rear of the receiver to be off (slanted like a old ak receiver), so when I put on a real romanian stock, it was slanted. I couldn't figure out how to correct this ( i did this after i cut the tangs off, and modded the romanian wire stock). That was the main reason why my AIMS project was put off indefinitely, and sitting in a million pieces. Anybody got any ideas how to get around this without buying a new receiver. Mrblah, could you please explain what difficulties may be encountered when fitting a REAL AK stock to an AEG? I'm considering converting the new Cyma AKM to an AIMS confguration, but am looking for a stock that will bolt to the AKM pattern receiver. It seems that the airsoft AIMS stocks on the market are made for the slanted AK-47 pattern receiver. I've found a real Romanian AIMS stock, but don't want to purchase it until I know for certain that it can mount to the Cyma AKM. http://www.arniesairsoft.co.uk/forums/inde...p;gopid=1735073 Link to post Share on other sites
Bloodsword Posted July 31, 2008 Report Share Posted July 31, 2008 Im dremeling my east german (same as romanian i suppose) to fit Inokatsu receiver, hope it`ll fit... Needs some serious work though. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.