Gene Posted February 22, 2006 Report Share Posted February 22, 2006 Try http://www.airsofttroops.com/ They have both railed and non railed silver and black versions....no two tone however I guess they would do one for you if you asked kindly. They're a little expensive though....a fully finished gun is about $590usd. As Titleist said, you can make one yourself no problem. I just put together a Creation kit and only minor filing was required in the pin holes. Redwolf's Sig is pretty well priced, but as you said, out of stock and they have been for some time. Same goes for their PGC kits. Here's a pic of mine. Just finished polishing the standard takedown lever, trigger, hammer, slide stop and de-cocker. This is the last look at it before it goes to a company in the States for a full brushed chrome finish on the slide and frame. <{POST_SNAPBACK}> Link to post Share on other sites
vincentsales Posted February 22, 2006 Report Share Posted February 22, 2006 I see your Sig and raise you this: <{POST_SNAPBACK}> I WANT ONE Did you make it up yourself? and what kit did you use? Link to post Share on other sites
Titleist Posted February 22, 2006 Report Share Posted February 22, 2006 Is there any shops that will make one exactly like that for me? like custom? <{POST_SNAPBACK}> Dude, seriously, no offense but it's a custom gun project. If you want one exactly like that you're gonna need to put in some elbow grease and money into doing it. When stuff like that becomes cookie cutter and off the shelf then what's the fun in that. Sorry but you're looking for a turn key solution when really it boils down to putting in some effort to do the job. Vincent, yeah I made it myself. It's using a custom one off kit from Prime, silver upper, black lower. Carom silver trigger/hammer. Hand polished metal pieces, guarder steel guide rod, guarder springs, tn barrel, upgraded valves, PGC piston head, and guarder chamber. I'm going to be ordering a set of the threaded and non-threaded guarder steel barrels (silver) to replace the aluminum one that came with the Prime kit. Link to post Share on other sites
Milla Posted February 22, 2006 Report Share Posted February 22, 2006 Gorgeous sig titleist. I would love to buy a 226, but i need to start saving for a real USP compact. Airsoft is a hell of a budget destroyer. Link to post Share on other sites
overide85 Posted February 22, 2006 Report Share Posted February 22, 2006 Ask Germany to donate you one..they donated a few thousand to the Afghan national Army and the Afghan National Police a few weeks ago Link to post Share on other sites
Caucasianasian Posted February 23, 2006 Report Share Posted February 23, 2006 (edited) I see your Sig and raise you this: Yes, I think you win the hand at this stage....until my frame and slide are brushed chromed anyhow....then there'll be a re-match. One question though (and you might have answered this before). Why did you spend good $$$ on airsoft when you have the real steel? I assume that is a real mag and ammo beside your gun and not from a model gun. Edited February 23, 2006 by Caucasianasian Link to post Share on other sites
Titleist Posted February 23, 2006 Report Share Posted February 23, 2006 How will it be a rematch? If the frame and slide are brushed chromed they'll be completely different guns. Big talk, I think I still win! Bow down! Kidding, no bowing, but glad you like it. I still win though, lol. I spent good money on an airsoft replica of Bauers Sig because two tone 9mm sigs exactly like that can retail for 1,200-1,500 thousand dollars USD. Yeah it is a real mag, I have a real Sig 226 that looks EXACTLY like my PGC equipped Sig 226, except my real one is a no frills range and defense handgun, looks exactly the same except it has hogue wrap around grips and a real surefire tac light on it. Link to post Share on other sites
Milla Posted February 23, 2006 Report Share Posted February 23, 2006 (edited) I <3 Hogue grips Edited February 23, 2006 by Milla Link to post Share on other sites
Agent Orange Posted February 23, 2006 Report Share Posted February 23, 2006 .45 ACP. Bauer isn't a *beep*, he wouldn't use anything less. <{POST_SNAPBACK}> Agreed, Jack is nobodies b**ch, but according to the guys at HKPro its a 9mm. http://hkpro.websolv.com/ubbthreads/showfl...sb=5&o=&fpart=1 Link to post Share on other sites
Titleist Posted February 23, 2006 Report Share Posted February 23, 2006 Umm, no it's not. I read that thread, it's .45acp, on guy on the thread was like "9mm" no facts were given to back it up. I call ###### on that bullshitter. Link to post Share on other sites
iBAWLS Posted February 23, 2006 Report Share Posted February 23, 2006 Titleist- according to http://www.sigarms.com/products/classic-full.asp the P226 doesn't come in 45ACP it is only 9MM or 40SW. The P220 is the Gun that comes in 45ACP. I don't know what the show 24 claims about his gun. either way you put it though the Full size SigSauer is a kick *albatross* gun. Link to post Share on other sites
Titleist Posted February 23, 2006 Report Share Posted February 23, 2006 iBAWLS, dude, read the last 3 posts, he was refering to the USPc being in 9mm. Jack Bauer would ONLY use .45acp because he's that much of a badass. Of course the Sig226 doesn't come in .45acp. Link to post Share on other sites
Scoped.In Posted February 23, 2006 Report Share Posted February 23, 2006 but the 220 does Link to post Share on other sites
rantng Posted February 23, 2006 Report Share Posted February 23, 2006 (edited) But if Jack Bauer would ONLY use a .45ACP and the SIG P226 doesn't come in .45ACP, then that would mean Jack Bauer did not use a P226, but a P220, which comes in .45ACP caliber, because he's a badass....and the 24 fans rioted. (Don't hurt me, I'm a 24 fan as well) Unless of course, he uses a P226 chambered for the .40SW round. Someone's going to tear me a new one. Edited February 23, 2006 by rantng Link to post Share on other sites
Titleist Posted February 23, 2006 Report Share Posted February 23, 2006 (edited) It's a 9mm 226, and a .45acp USPc. btw, proof of the weird sig 226 switching, you can tell because the vertical cuts in the slide on the 229 do NOT go all the way up, it's clearly some funkiness in 24-ville: 229: 226/228: Continuity for teh win! Yeah I told you it jumps around. Now here's what's been bugging me, I can't confirm if it's a silver barrel in his 226. If anyone wants to help me out, is it a black barrel with a worn silver chamber, or a straight up silver barrel? For proof: Anyone wanna wager what color it actually is? Edited February 23, 2006 by Titleist Link to post Share on other sites
ash^ Posted February 24, 2006 Report Share Posted February 24, 2006 Nice 226, but the trigger guard is wrong on the non railed Prime kit :/ Its size differs between railed an non railed versions, and Prime didn' t modify it on the non railed kit... It would be perfect with a PGC frame. Link to post Share on other sites
Titleist Posted February 24, 2006 Report Share Posted February 24, 2006 (edited) Sorry ash but the PGC is incorrect, not the prime. For example the PGC does not fit in my BHI CQC SERPA holster, the PRIME does, I've messured it, the PRIME one does not use the front screw that holds the trigger assembly into the frame, it's held in by a side screw, the PGC is longer to allow for that screw. I've messured it, the PGC is incorrect. Edited February 24, 2006 by Titleist Link to post Share on other sites
iBAWLS Posted February 24, 2006 Report Share Posted February 24, 2006 your right Titleist, I read the posts, but I read them the wrong way. Link to post Share on other sites
[VT]Mofo2000 Posted February 24, 2006 Report Share Posted February 24, 2006 Pair of Sigs, KJW FMV and TM Link to post Share on other sites
Gene Posted February 24, 2006 Report Share Posted February 24, 2006 All Jack Bauerisms aside, what's a good weaponlight for a non-railed P226? Seems like all of Surefire's are rail-mounted. Link to post Share on other sites
Titleist Posted February 24, 2006 Report Share Posted February 24, 2006 Here's what I use on my real 226, and have put on my airsoft 226s for a few games: http://www.surefire.com/maxexp/main/co_dis...18/prrfnbr/1001 It includes an adapter that clamps on to the trigger guard housing. You can find these for about 200-215 if you hunt. I HIGHLY recommend this model. Link to post Share on other sites
rantng Posted February 24, 2006 Report Share Posted February 24, 2006 Got any higher resolution pics? I'd like to see how the KJW matches up. Pair of Sigs, KJW FMV and TM http://filebox.vt.edu/users/pepeng/Pics/Ai...sc/DSCN1457.JPG Link to post Share on other sites
[VT]Mofo2000 Posted February 24, 2006 Report Share Posted February 24, 2006 Other than lack of trades and the mag, it's identical to TM. Altho TM mag are slightly too thick for the KJ gun, the KJ mags can fit into the TM gun. So KJ owners have to buy KJ mags, while TM owners can buy the cheaper KJ mags, sneaky marketers. Also KJ sig is significantly heavier than TM. And the blowback is very crisp and sounds very metalic, i'd say on par w HFC M190 or better. Here's the Hi rez version that you requested: Link to post Share on other sites
Mathub Posted February 24, 2006 Report Share Posted February 24, 2006 Talking about non-railed pgc kit, mine is a perfect fit in a GKpro leather holster. So who knows... Link to post Share on other sites
Titleist Posted February 24, 2006 Report Share Posted February 24, 2006 dangit, you're gonna make me get out my calipers and check. As someone who's spent a lot of time on my 226 I can say easily that the PGC one is wrong, it's too long of a trigger guard, not sure if you're handled a real 226 before but it's too long because the PGC had to account for that screw that goes into the frame, whereas the PRIME one does not. Now, does anyone have any advice on my silver/black barrel issue? Link to post Share on other sites
Recommended Posts