prancing Posted June 20, 2005 Report Share Posted June 20, 2005 Where you going to get a tight inner barrel for it? I may buy one of these and I would like a tight inner barrel. Link to post Share on other sites
alecamused Posted June 21, 2005 Report Share Posted June 21, 2005 Where you going to get a tight inner barrel for it? I may buy one of these and I would like a tight inner barrel. <{POST_SNAPBACK}> you're asking me? don't know. i guess i'll take some tight barrel and cut and file until it fits.. mount: its technically a tmp/spp mount and some screws.. Link to post Share on other sites
prancing Posted June 21, 2005 Report Share Posted June 21, 2005 ok. thanks for your help. cheers Link to post Share on other sites
exoframe2 Posted January 17, 2006 Report Share Posted January 17, 2006 Finally finished up my MKII (not a MKI anymore ) Started life as a KJW MKI, now it looks like this: Airsoft parts: King Arms silencer, KICBBGun MKI Carbine metal receiver, PDI silencer adapter, ANGS light trigger pull kit. Ruger parts: Grip panels, bolt catch lever, hammer pivot pin (the pin the bolt catch swivels on, trimmed down so it doesn't hit the hammer inside), front and rear sights. While it's not a TRUE MKII since it doesn't have the relief cuts in front of the bolt grips, the MKII grips and moving bolt catch are enough for me. I had to shave about 3mm off this sight to get it low enough, as the silencer adapter is much thicker than a bull barrel. The only work the rear sight required was getting the dovetail to fit. The KJW cut was about 2mm thinner than Ruger's. I repainted the upper assembly (all metal now) in black and buffed it to a shiny finish. I sanded off all the mold lines on the lower and shined up the plastic with steel wool. Makes it much harder to tell the lower receiver isn't metal. And last but not least, sound clips. Stock Bull Barrel Silenced Taken from about 5 feet away, firing out my back door. Link to post Share on other sites
CapaciousZepher Posted January 17, 2006 Report Share Posted January 17, 2006 (edited) Very, very sweet. Makes me want to dust off my ninja/assassin costume.... Beautiful. Cheers! - CapaciousZepher Edited January 17, 2006 by CapaciousZepher Link to post Share on other sites
[H&K]Ravizzone Posted January 17, 2006 Report Share Posted January 17, 2006 (edited) I have a real one of these, might post some pics later. Has a tapered barrel and wood grips. Edited January 17, 2006 by [H&K]Ravizzone Link to post Share on other sites
dtmowns Posted January 17, 2006 Report Share Posted January 17, 2006 Is it silver? I think i saw the same one at Turners and it was jaw-dropping... Link to post Share on other sites
exoframe2 Posted January 18, 2006 Report Share Posted January 18, 2006 (edited) A friend of mine brings his MKII to the range each time we go. I love firing that gun, such a nice break from the bigger bores we usually fire. All-around great target gun. Airsoft-wise, since the power of that pistol is [above forum limits] I don't use it in games, since it's only accurate in short range and with fps near or at the maximum allowed for AEGs in Texas, it just seems unsportsmanlike to hit folks that close with it. I get a lot of compliments and requests to fire it off at targets in our staging area. The sound of the shot and lack of recoil from a NBB are very deceiving of the power this little pistol packs. Seems ironic, considering the real-steel variant to me Edited January 18, 2006 by exoframe2 Link to post Share on other sites
Recommended Posts