82 replies to this topic

[masakarijoe]

well, as far as the IAR, that is exactly what i am doing, kinnerley. ive already ordered everything i need, and a G&P M4A1 is the host. so yes.
but MAGZ, you are right, there is no replica of that rail yet, i had to settle for a troy. and the barrel im using will be a 16" with a clamp on gas block front sight. again, that is for the M6A4 IAR, not the M6A2 or PSD.
-Joe

[Victory]

Unless I'm missing something, looking at those pics, it makes me wonder what Troy, VLTOR, and Magpul...especially Magpul, will think when they see clones of their products being sold with the CA. (Troy sights, VLTOR and Magpul stocks. Edit: Looks like there's a MIAD on the PSD, so that as well.)

Other than that speed-bump, they look good thus far, methinks.

-Vic

Edited by Victory, 13 February 2009 - 03:12 AM.

[Magsz]

Unless I'm missing something, looking at those pics, it makes me wonder what Troy, VLTOR, and Magpul...especially Magpul, will think when they see clones of their products being sold with the CA. (Troy sights, VLTOR and Magpul stocks. Edit: Looks like there's a MIAD on the PSD, so that as well.)

Other than that speed-bump, they look good thus far, methinks.

-Vic

Those are probably PTS parts which Spartan Distributes. Im pretty sure that there is no conflict there.

[Victory]

Yeah, that's what I had figured. Thought I'd stick it out there anyway.

-Vic

[orca]

Those are Official Magpul-PTS MOE parts on the PSD.

The Emod stock is a replica on the M6, but side battery compartments are larger to hold Sub-C Crane batteries and has a new quick Crane battery install design unlike the current difficult to install CA Crane Stock battery design.

[orca]

New pics, as these CA LWRC replicas get closer to production. Logos are laser engraved.

 IMG_4615.JPG   47.82K   143 downloads
 IMG_4617.JPG   46.65K   130 downloads

[kodiak22]

I spot me some MRE(ish) finish .

[thartwig]

i know most of you probably have noticed, but i didnt see nay one mention it yet, so ill say it.

But the CA's new hop up unit looks very similar to the ICS (m4) one. Does anyone think that they'll be compatible?

[Mr Foxhound]

I think the white trademarks ruin it, imo

[reaper16]

So..i have lied to myself, this is the only CA i will ever consider buying, as i have sworn off them since my M15.

[orca]

More details and pictures of the soon to be released Classic Army LWRC M6A2.

Features of M6A2 (CA051M)

1. Real LWRCI logo
2. Blowback System
3. Steel Flash Hider
4. Super Torque UP Gear Set
5. Super Torque Up Motor
6. Advanced Power Spring (approx 400fps)
7. Hi-Cap Magazine (300 Rd)
8. Flip Up Metal Front & Rear Sight
9. New Design Metal Hop Up Chamber
10. Aluminum Piston Head with Bearing
11. 8mm Metal Bearing Patented Gear Box
12. CNC Free Float Rail System
13. Enhanced Carbine Modstock
14. Li-Po Battery can be used for Power Saving
15. Same Unique Serial Number & UID Matrix on Upper & Lower Receiver

 IMG_6809.JPG   458.43K   113 downloads  IMG_6801.JPG   719.47K   46 downloads  IMG_6803.JPG   686.79K   39 downloads  IMG_6807.JPG   686.3K   53 downloads  IMG_6800.JPG   683.33K   56 downloads

[The S.C.A.R.]

Just handled one, it feels very good and comfortable in your hands, although like what you guys said before, the white trademarks spoiled the effect of a realistic gun. Haven't shot it or chronoed it at the moment, but from the externals it looks quite good.

Edited by The S.C.A.R., 25 June 2009 - 03:04 PM.

[Pradal-Serey]

still not available?

[uscmCorps]

Those last pics Orca posted are much more promising than the original release pics. I could live without the Classic Army engraving on the right side of the lower receiver, but it isn't that horrible or noticeable. I'll definitely check it out once available at AEX.

[Jay7]

Looks abit too 416 like for me.

[nieb15]

Those last pics Orca posted are much more promising than the original release pics. I could live without the Classic Army engraving on the right side of the lower receiver, but it isn't that horrible or noticeable. I'll definitely check it out once available at AEX.

You could always fill it in with some putty or something.

It's not a bad looking rifle. I just don't like the "auto" selector marking.

[The S.C.A.R.]

still not available?

The "M6A2" is available, bt not the PSD, and the guys from CA told me that they had no idea of when the PSD is going to be released

[uscmCorps]

I handled a real steel LWRC M6A3 today ... After paying close attention to the aesthetics of it, I'd say the pics Orca posted shows that CA are right on the money in terms of stampings, laser engravings, and finish. Now there's only one problem ... I want a RS LWRC M6A3!

[Pradal-Serey]

The "M6A2" is available, bt not the PSD, and the guys from CA told me that they had no idea of when the PSD is going to be released

Hi

Thank you for your answer, do you know where I can find it? I tried redwolf, wgc etc... nothing
Also Do you think the handguard can be purchased separately?

[Victory]

I handled a real steel LWRC M6A3 today ... After paying close attention to the aesthetics of it, I'd say the pics Orca posted shows that CA are right on the money in terms of stampings, laser engravings, and finish. Now there's only one problem ... I want a RS LWRC M6A3!

They're "teh sechs", aren't they?

I hope so...mine should be here in a couple weeks.



I'm highly interested in these CA replicas...can't wait for them to be released.

-Vic