PynkPanthyr Posted February 24, 2009 Report Share Posted February 24, 2009 Hey guys, yesterday I received my TM MEU and I shot a few mags off no problem. Then today I took it out gased it up and fired off 4 more mags, no problem but now when I try to shoot it fires the first shot maybe the second (It also expels a large sum of gas from the chamber now) and after that the slide wont blow far enough back to load another BB. Then it runs out of gas after 2 or 3 more shots where it wont load the bb's. Any one know whats wrong? Im new to GBB's and am kinda stumped as why this started happening. Thanks. Link to post Share on other sites
tom_chant_uk Posted February 25, 2009 Report Share Posted February 25, 2009 Sounds like you're not filling the mag enough. Try holding the mag upside down, insert the gas nozzle and keep filling until the overspray increases and then try firing again Tom. Link to post Share on other sites
Romulus Posted February 25, 2009 Report Share Posted February 25, 2009 How warn is it where you are? If it's cold out the mags might not fill well, the efficiency and power will go down, and you will get a ton of cooldown unless you rewarm your mags between shooting and reloading. Link to post Share on other sites
Kai_Wolf Posted March 1, 2009 Report Share Posted March 1, 2009 Yeah, it sounds like a cooldown issue. I dont know if this was one mag after another, but if you let one sit somewhere warm for a while after filling it properly, it should shoot fine. Keep in mind that 1911 magazines are thinner than the double stacks, so the temp is effected much quicker when it comes to the cold. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.