ancorp Posted June 14, 2009 Report Share Posted June 14, 2009 Footage of a Chinese copy of the GHK kit cross posted from another forum. Could this be the one Dboys cloned a while back, or someone else? Supposedly the cost will be under $200 for the kit. EDIT: OP on other forum says it is full steel, and not DBoys. Link to post Share on other sites
RUSHER2 Posted June 14, 2009 Report Share Posted June 14, 2009 Hopefully the mags are good! cheaper alternitive to the mags for my AK Link to post Share on other sites
my_plague_666 Posted June 14, 2009 Report Share Posted June 14, 2009 interesting. cheap mags would be nice... especially if they're CO2 mags might convince me to actually buy one unlikely they'll be CO2 though. Link to post Share on other sites
AKRay Posted June 14, 2009 Report Share Posted June 14, 2009 I'm curious, would this work in the old style TM-like AK builds (you know the type, 4 screws to hold the front assembly on), or would it only work in the newer, realistic takedown builds, which everyone seems to make these days? Link to post Share on other sites
WhiteHawksan Posted June 14, 2009 Report Share Posted June 14, 2009 Any idea who is making this? Or any idea on price? Looks good though =D Link to post Share on other sites
Puding Posted June 14, 2009 Report Share Posted June 14, 2009 I'm curious, would this work in the old style TM-like AK builds (you know the type, 4 screws to hold the front assembly on), or would it only work in the newer, realistic takedown builds, which everyone seems to make these days? if its a clone of the ghk kit it will only work with lct adn vfc based designs Link to post Share on other sites
snorkelman Posted June 14, 2009 Report Share Posted June 14, 2009 If its milled from steel and under 200 buks thats a nice price, if its cast alloy it'd need to be under 100 biggest concern would be if it was some rough cast steel that passes all the magnet tests but doesnt really prove much tougher in use at critical areas than the stock zinc-alloy parts A cheap 'recoil rod, hop unit, springs and pins' kit would be handy though -would save buying a GHK kit just to rob those parts for a set of DG internals Link to post Share on other sites
AKRay Posted June 14, 2009 Report Share Posted June 14, 2009 if its a clone of the ghk kit it will only work with lct adn vfc based designs hopefully it should work ok in my LCT AKS74 kit (specifically this one). If not, then I'll just have to buy another AK. Link to post Share on other sites
Puding Posted June 14, 2009 Report Share Posted June 14, 2009 i converted my vfc to fit the ghk kit and i know people who have done the same with the LCT just be aware you will need to use a dremel and you will not be able to go back to a aeg afterwoods Link to post Share on other sites
qlong Posted June 16, 2009 Report Share Posted June 16, 2009 The conversion of the AK74U is reversible, however for the AKS74, the removal of a quarter inch from the outer barrel is still more difficult but also reversible with a spacer. Link to post Share on other sites
Paul EB Posted June 26, 2009 Report Share Posted June 26, 2009 Dboy will release the GBB AK74U next month at very low price m better quality, no reason we have to spend USD200 for such kit The conversion of the AK74U is reversible, however for the AKS74, the removal of a quarter inch from the outer barrel is still more difficult but also reversible with a spacer. Link to post Share on other sites
mrbishi Posted June 26, 2009 Report Share Posted June 26, 2009 unless you dont want a shítty 74u and would like a full lenght version for the gun you already own. or even an AKM... Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.