VFC GBBR Series

[SilentTank]

Here's a heads-up...

 

http://www.wgcshop.c...vfc&catid=&cat=

 

WGC puts the VFC M4/M16 mag at a $34 value, which is VERY attractive to say the least.

 

 

Also, this looks nothing like the WA one.

 

 

It's getting hotter...

 

Thats the best price for a gbb mag I have ever seen....*suitcase* I hope it doesn't come out for another month!!! That way I can get my mula and buy one m4 and like 5 mags!!! WANTTTT

[hayabusa46]

http://www.youtube.com/watch?v=rkI1cmsacr0

 

[D.O.C.]

Now also available @ RA-T for 396 USD:

http://en.ratech.com.tw/product/agent_product/gas_product/vfc/rag_agent_pro_g_vfc.php

Specification:

 

* Magazine Capacity: 38 ( 6mm )

* Length: 780-862mm

* Barrel Length: /mm

* Weight: 2710g

* System: Gas Blowback, Semi / Full Auto, Hop-Up

* Muzzle Velocity: /

* Package Includes: Gun, Magazine, BB Loader

* Free shipping

 

DOC

[SilentTank]

Now also available @ RA-T for 396 USD:

http://en.ratech.com...t_pro_g_vfc.php

 

 

DOC

 

has anyone heard yet definitive proof positive that the mags work with WA/WOC series? I heard yes from some random guy but he had no back up sources to speak of.

[RacingManiac]

Nothing definitive, I thought it was kinda odd the RA-T review did no mention of it. Most of the official VFC line is no. The RA-T video shows that their BCG was a drop in replacement for the VFC one. But if VFC focused more of their changes on the lower receiver(maybe striker location) then that might be where the incompatibility comes from.

[IronWolf]

Just got to use one of these briefly today, it was a pre-production model with VFC trades on the lower receiver. The kick and report were terrific, although the ROF was a little slower than I was expecting. The firing range was too short to properly assess the groupings unfortunately, but I found that the hop up was easy to adjust and clicked in at differing intervals.

[RacingManiac]

http://www.arms-cool.net/forum/thread-61765-1-1.html

 

Someone on Arms-cool did some part swapping on a VFC, a summary:

 

-WA hop-up/outer barrel works on the VFC(if needed some minor work)(parts used, 5KU barrel extention, 5KU hop-up, Ino steel outer barrel)

 

-WA spec BC needs major modification, the valve-reset/cut-off lever is on the opposite side of the WA design, needs a new groove cut in to function properly(not sure how RA-T did theirs).

 

-WA spec bolt works, if not needed some mod(he tested 3, Element PPS nozzle, Pro&T(needs mod), and Ino 2010 aluminum(needs mod).

 

-PGC mag needs the bolt lock-back mech and the valve lock removed, needs some shimming in the mag well(loose), and the gun needs to be cocked(or shave down the valve) before it can be inserted. Use PGC 0.45 spec rubber.

 

-He broke the buffer retainer(swapped with Ino one for replacement), and broke the bolt carrier(replaced with a modded WA spec one, by cuting a new groove)

 

-He mentioned the gun use a lot of gas, semi-fire is ok, full auto the propane spews out of the gun very easily. Part of the mod he did on the WA bolt was to make his groove shorter than the stock VFC to cut off the gas earlier.

 

From another thread on the same site, another user mentioned that:

 

-RA-T used the Prime bolt for the VFC(http://www.arms-cool.net/forum/thread-61735-1-1.html), needed to be modified to work(guessing its the groove mentioned before).

 

-He also brought up some point that the tolerance affects how the gun feels, and said that each VFC feels different based on how the parts work together.

 

For those wondering if you use a WA-spec bolt with a WA mag, you still need to do the bolt mod I believe, since the valve lock/hammer reset lever on the VFC is no longer located on the mag, but its part of the firing pin/hammer mechanism as seen here:

 

Note the small lever by the hammer behind the bolt release.

[bbondaloose]

 

 

일반 콜트 M16용 탄창와 HK제 탄창이 실물도 다른 만큼 재질이나 사이즈가 다르다.

 

특이한 2단 구조가 보이는데 실은 일반 전동총용 탄창케이스를 그대로 사용하기 때문이다. 기존 전동총 시리즈의 그것도 부품도 공유할수있어 제작비 절감과 제작기간 단축의 효과도 있고 WA방식의 탄창에 비해서 무게도 상당히 가볍다.

 

 

 

 

Mag capacity is mentioned at 35 rounds, though that may be a translation error, perhaps someone who attended SHOT or IWA 2010 can shed some light on this?

 

Regular Colt M16's Magazine, and HK's have different capacities, and different size.

Special 2 Part Receiver is made of metal.

Production has started, and compared to WA, the weight is a lot lighter.

 

Some words here and there I don't understand, but that's basically what it saids.

[SilentTank]

I have tried to keep up on this thread I hear the compatibility of using wa mags in the VFC but no mention of the VFC mag in the wa's?? any luck working well??

[CPT-Federal]

WGC now have them in stock... can't wait for reviews! Anyone got theirs yet?

[D-JHapyMeal]

WGC now have them in stock... can't wait for reviews! Anyone got theirs yet?

 

 

Just like UNcompany, cant wait either!

[league 4]

So when will they arrive in the US? And are they reliable enough to use OOTB without modifications?

[fr00b]

Pretty keen to hear feedback on these, anticipating the 416.

[IronWolf]

Getting mixed reports from the Taiwanese forums, I'm also going to wait for the 416 version

 

VFC have re-designed their website, and now list the spare parts available so far, link.

[D-JHapyMeal]

Might be old news, but UNcompany has them in stock, so i hope people will order some and do a review about it.