Tariel Posted May 5, 2011 Report Share Posted May 5, 2011 Hi all, up for sale today is one of my rare pieces. It would be at the core a G&P SR25. This is a gun that is very hard to come by, with all the accessories and items it has. I'll say this now, it's going to be a bit costly, but it's worth every dollar. I origonally started this gun as a project gun, it didn't start complete. I put together a variety of parts to build it. I did this because I wanted a specific look, but didn't want to have spare stuff sitting around or pay more for the gun and accesories to achieve it. The gun is modeld after the SR25 Match Light. I spent alot of time tuning and upgrading it and it performs great as a semi-auto sniper rifle. This gun is permanantly set to be in semi auto mode externally by the selector and internally by the selector plate. So it cannot fire full auto without the right parts. The gun also retains all the trademarks, with none atlered. lastly, it's wired for deans. In all, the gun is in very good shape. The gun comes with a bipod, scope, scope mounts, 1 - 170 round magazine and an SPR flash hider. A little something about this, the gun has a 20 inch external barrel, which can only accomodate a 509mm inner barrel. At the moment I have a 590mm barrel. It stick out a little, my intention was to always have a 24inch barrel made. That never happened. So to compensate, I had an SPR flash hider made to fit the barrel. Anyway, I'll explain about the internals and externals it comes with. Internals: Prometheus 6.03mm TBB (650mm long) Classic Army Hard Hop-up Rubber Systema M16 Hop-up Chamber Deep Fire Metal Air Nozzle (AUG size) Classic Army Tappet Plate TM V2 Cylinder Head G&P Long Cylinder Prometheus Bearing Piston Head Systema Aluminium Long Piston (Was Modified from a PSG piston to fit the SR25) Guarder SP150 Spring Systema V2 Bearing Spring Guide G&P Infiniti Torque-up Sector Gear TM Infiniti Torque-up Spur Gear Systema Infiniti Torque-up Bevel Gear King Arms 7mm Bushings Modify Shims Systema V2 Swtich Assembly Systema Cut-off Lever Systema Anti-reversal Latch Systema Magnum Motor G&P Version 2 Long Gearbox Externals: PDI SR25 Match L 20inch Barrel set King arms Long Retract Type Harris Bipod G&P SR25 Reciever G&P SR25 Shell Deflector G&P 600M Rear Flip Sight King Arms 30mm Scope Rings King Arms M3 Scope TM M16 Stock TM M16 Grip The compression is perfect, this is the test done with the air nozzle extended out. It shoots a consistant 530 FPS +/- 3. The range is roughly 300 Ft accurate. My parts set is not complete for my own taste, but it's perfectly functional without any other need of parts. It's rock solid and goes no where, the best battery for this gun is a Li-po battey, minimum 7.4v. That or a 10.8v or up. Here are the pictures. Original model made after: http://img695.imageshack.us/i/stoner2.jpg/ Gun: http://img190.imageshack.us/i/picture019qg.jpg/ http://img829.imageshack.us/i/picture022v.jpg/ http://img23.imageshack.us/i/picture023m.jpg/ http://img690.imageshack.us/i/picture024eq.jpg/ http://img820.imageshack.us/i/picture025v.jpg/ http://img593.imageshack.us/i/picture026d.jpg/ http://img7.imageshack.us/i/picture027hh.jpg/ My Price is $1030 shipped. Buyer will get best and fastest shipping that is reasonable. There are no trades I'm after at this time, I will not part out either. I rather sell the whole thing. I chucked off a good amount of the origonal amount I spent so don't expect the price to go lower, it's a good buy for it's money. I don't mind keeping it if no one buys it, but I'm in need of money to fund another project I have had in the back seat for a while. Thanks for looking! PM me if interested. Link to post Share on other sites
Tariel Posted May 13, 2011 Author Report Share Posted May 13, 2011 The gun has been sold. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.