Jump to content

New ICS Motor * Turbo 3000 "


Jedi2155

Recommended Posts

I spotted this on their main page http://www.icsbb.com

 

http://www.icsbb.com/news/news_main.asp?id=70

 

Supposedly it has double the power of the old ICS Turbo 2000 and can handle up to a M180

 

DSCN8984(4).jpg

 

DSCN8988(2).jpg

 

Babelfish Translation

I torsion = torque

ICS the brand-new motor TURBO 3,000 series already 式量 produced, this was a section high rotational speed, the high torsion, the high efficiency motor, in this section of period, TURBO 3,000 series already through in domestic and foreign customers and factory many strict tests, except had the high rotational speed, the superelevation torsion characteristic, and was not easy many superiority which felt hot, therefore, the TURBO 3,000 series might completely be suitable wrap which promoted in the market condition.

Because the torsion large scale promotion to 3,875 g.cm, completely surmounted original TURBO 2,000 motors nearly 2 times to be many, because of the ultra strong torsion, was allowed relaxed to draw M180 the spring, completely could not feel formerly drew the strenuous condition, and felt the rotational speed the drop time, if only used in generally to reequip, was easy, handy, demonstrated this was a high efficiency outstanding motor; TURBO 3,000 wholes performance, extremely satisfying, after may say is unprecedented does not have the future, the world is invincible.

A better news is, this brand-new development motor, will install to ICS entire series Cheng Ch'iangzhong, will enable the consumer to obtain the biggest benefit, will enter the step to play the family also to have a bigger display and the promotion space.

 

Below is the brand-new TURBO 3,000 motors and the TURBO 2,000 motors operation data compares:

 

TURBO 3,000 motors

Rated voltage 8.4V

The rating outputs 102W

Free-running speed 23,300 R.P.M (8.4V)

Biggest torsion 3,875 g.cm

 

TURBO 2,000 motors

Rated voltage 8.4V

The rating outputs 53.82W

Free-running speed 26,000 R.P.M (8.4V)

Biggest torsion 2,082 g.cm

 

Now if they start putting these as stock..... :D

Link to post
Share on other sites
Darn, no edit button for my post :(.

But sweeet!!!!!

 

hi,

I was just wondering if anyone knew whether the ICS mp5a4 comes with the new motor, as on zerooneairsoft.com the Ics M4 CQB comes with a " super torque motor fitted as standard" but it also says that the older mp5s have the " super torque motor fitted as standard". So im not sure whether this is the new 3000 motor or the old 2000 which is classed as a super torque. Anyone know?

Link to post
Share on other sites
I spotted this on their main page http://www.icsbb.com

 

http://www.icsbb.com/news/news_main.asp?id=70

 

Supposedly it has double the power of the old ICS Turbo 2000 and can handle up to a M180

 

DSCN8984(4).jpg

 

DSCN8988(2).jpg

 

Babelfish Translation

I torsion = torque

Now if they start putting these as stock..... :D

[According info from the US ICS importer, all their AEGs will eventually include the Turbo 3000 and steel bushing with very little changes in price. The AK will be available in early April. ]

Link to post
Share on other sites
[According info from the US ICS importer, all their AEGs will eventually include the Turbo 3000 and steel bushing with very little changes in price.  The AK will be available in early April. ]

 

Yep, that's Team SD, I called them yesterday and also confirmed that with them, as well as placing an order for... guess what? :rifle:

Link to post
Share on other sites
  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.