18 replies to this topic

[rider1]

This was forward to me from an online retail store.
New company making a unique RIS free floating hand guard compatible with M4/M16s from Marui, CA, ICS, & GG.





Don't try this at home!

Attached Files

•  JB29__test1.JPG   247.02K   14 downloads
•  JB29__test2.JPG   231.27K   18 downloads
•  JB29__test3.JPG   231.76K   28 downloads
•  JB29__test4.JPG   230.63K   13 downloads
•  JB29__test5.JPG   241.39K   8 downloads
•  JB29__test6.JPG   239.78K   10 downloads
•  JB29__test7.JPG   247.63K   12 downloads
•  JB29__test8.JPG   249.15K   29 downloads

Edited by rider1, 22 April 2006 - 10:36 AM.

[Colonel Angus]

OK...so who's going to sell it? Whats the cost? I want answers now.

[letterbomb]

Was the car bit really neccesary? I meen I dont personally go to skirmish thinking *beep* what if I drop my gun infront of a moving vechile on the playing area?

[DarkLite]

Ooooooh.

I'm definately keeping my eye on this.

[bjorn]

Price - thats all that matters.

[Rec]

Is there a real-steel counterpart to this?

[Gene]

ICS makes this, it's their new RIS. I've been told it'll cost around $90 (At most). It's real steel counterpart is made by Olympic Arms and can be found on their website here: http://www.olyarms.com/?rootView=browse&view=cat&ids=firsh

[staticzero]

Anyone looking to put this (or any similar rail system) on their CA M15A4 be warned, you'll run into the rail height issue. The CA M15A4 flat top upper receiver's rail is out of spec, it's too tall by 1-2mm. This means the top rail of any aftermarket rail system that is to spec will be lower than the receiver's top rail. In the case of a monolithic forend like this one which normally gets you a nice long uninterrupted top rail you will get this instead:



Most unpleasant.

Edited by staticzero, 22 April 2006 - 05:00 PM.

[rider1]

OK...so who's going to sell it?  Whats the cost?  I want answers now.

<{POST_SNAPBACK}>

You'll have to verify this but i think you can find it at www.blazingtoys.com & evike.com.

[spunjah67]

we've done a couple of guns with this front end already. it looks ok IMO. you just got to be careful not to over tighten the locking screws on the bottom becuase they break easily.

[teetee]

Nice to know all my kit will survive getting run over... but will I?

Please provide a link to a retailer in the UK! Appreciated.

[DarkLite]

we've done a couple of guns with this front end already.  it looks ok  IMO.  you just got to be careful not to over tighten the locking screws on the bottom becuase they break easily.

<{POST_SNAPBACK}>

So the RIS itse;f can be run over, but the screws holding it to your gun can break easily...

Well that's well thought out.

[Buttons]

Its not actually made by ICS... Its made by JB Unicorn.

http://cgi.ebay.com/JBU-AIRSOFT-TACTICAL-R...1QQcmdZViewItem

https://www.evike.com/Merchant2/merchant.mv...ode=NEWARRIVALS
https://www.evike.com/Merchant2/merchant.mv...ode=NEWARRIVALS

[mario114]

Anyone looking to put this (or any similar rail system) on their CA M15A4 be warned, you'll run into the rail height issue. The CA M15A4 flat top upper receiver's rail is out of spec, it's too tall by 1-2mm. This means the top rail of any aftermarket rail system that is to spec will be lower than the receiver's top rail. In the case of a monolithic forend like this one which normally gets you a nice long uninterrupted top rail you will get this instead:
     
Most unpleasant.

<{POST_SNAPBACK}>

But it still fits the CA m15 a4 without any mods?

Sounds allright, is there any that will fit smoth on the top, I'm guessing the ca one, but they only sell it with a new barrell, and it costs a lot more.

Edited by mario114, 25 April 2006 - 05:08 PM.

[Gene]

Its not actually made by ICS... Its made by JB Unicorn.

http://cgi.ebay.com/JBU-AIRSOFT-TACTICAL-R...1QQcmdZViewItem

https://www.evike.com/Merchant2/merchant.mv...ode=NEWARRIVALS
https://www.evike.com/Merchant2/merchant.mv...ode=NEWARRIVALS

<{POST_SNAPBACK}>

You are bidding on a Olympic Arm licensed FIRSH Tactical hand guard. (Free-floating Integrated Rail System Hand guard).

And who holds the trademarks rights for Olympic Arms?

TIP: ICS

[Buttons]

Well thats only on firearms... And JBU IS the manufacturer.

[Gene]

Can't get no respect

http://www.icsbb.com/order/e_detail.asp?Ca...8&ProductID=680

[DarkLite]

Can't get no respect

http://www.icsbb.com/order/e_detail.asp?Ca...8&ProductID=680

<{POST_SNAPBACK}>

Lol.

"Front condition is hung in the air."

"Heroic bearing mounted on rifle."

Edited by DarkLite, 26 April 2006 - 10:59 PM.

[Holmes]

Availible at airsplat for $75! ($90 for M16 length)