M1 Grand Posted December 16, 2006 Report Share Posted December 16, 2006 Can someone tell me how to mod PC duster gas to go into a GBB. Also how do I get it and the right amount of 100% pure silicone lube into this: http://www.wgcshop.com/pcart/shopper.php?i...-TDDD_cat_Dummy I will be getting a TM 1911a1:) and want to use hfc134a but don't want to have to pay the high price for it. Basically how do I get it in that canister with the lube. I use propane know in my HFC M190 (For sale) and know how to do that. Link to post Share on other sites
Clot Posted December 16, 2006 Report Share Posted December 16, 2006 If this is possible, tell me, I sell buckets of the stuff and can do it cheap for everyone. Link to post Share on other sites
M1 Grand Posted December 16, 2006 Author Report Share Posted December 16, 2006 Oh, I know it is possible people do it all the time. I just dont know what I need to do to get it into the mag from the duster gas can. Link to post Share on other sites
Sledge Posted December 16, 2006 Report Share Posted December 16, 2006 Don't Airsoft Innovations do an adaptor? Link to post Share on other sites
M1 Grand Posted December 16, 2006 Author Report Share Posted December 16, 2006 I don't know I will have to check Link to post Share on other sites
jimseery Posted December 16, 2006 Report Share Posted December 16, 2006 Airsoft Innovations does an adaptor. He's had problems with his website but I believe he's back on line. As I understand it you pop the top off the duster can, put a drop (or spray) of silicone oil into the adaptor, put the adaptor on the can and go for it. I bought a propane adaptor from him and his stuff comes with good instructions. Link to post Share on other sites
snowman Posted December 16, 2006 Report Share Posted December 16, 2006 Indeed they do - There's a review on my website - http://www.justpistols.co.uk/kit.htm Cheers Link to post Share on other sites
M1 Grand Posted December 16, 2006 Author Report Share Posted December 16, 2006 I when to the site and found the Propane adapter but not the duster adapter? Link to post Share on other sites
The Saint Posted December 16, 2006 Report Share Posted December 16, 2006 I think MadMax is out of duster adaptors for the time being. http://www.ascarmoury.com/index.php?cPath=5_59 Link to post Share on other sites
Lon Posted December 16, 2006 Report Share Posted December 16, 2006 I when to the site and found the Propane adapter but not the duster adapter? <{POST_SNAPBACK}> I've emailed him a couple times before, but no answer. Problably due to site problems. But, I've read on a thread here that the duster adapter is coming soon... You don't NEED an adaptor, though. What I do is just cut the tube that the can comes with, maybe about 1.5 an inch's worth, put that in the hole, and lightly superglue around it. If you put too much, you can't push the can down into the valve. Works perfectly + minimal leakage. Anyone want pics of this simple 'mod'? Link to post Share on other sites
stew_b_10 Posted December 17, 2006 Report Share Posted December 17, 2006 yes please. that would be helpful. Link to post Share on other sites
Lon Posted December 17, 2006 Report Share Posted December 17, 2006 Ok, here's a pic. Sorry for the bad quality: As you can see, it's just a plain old duster can. Just take the top (trigger looking) thing off, cut an inch and half's worth of the small tube the can comes with, put it in the hole, and seal the gap between the tube and the hole with a light amount of superglue. If you put too much, you won't be able to press down to fill your mags, so be careful. Wait for about an hour or so for the glue to totally dry out; the more time the better. I've filled my plastic slided gun's mags like this countless times (no "real" 134a here), so it should work for you if you do it right. And that's it, you've got yourself a can of airsoft duster/"134a" Link to post Share on other sites
Chris North Posted December 17, 2006 Report Share Posted December 17, 2006 Duster gas is HFC134a, which is R-134a. It's all the same thing, but I still don't understand why the airsoft propellant needs to cost 5 times as much as duster. So the tube fills the gun mag? I made something similar a few days ago, but the thing didn't fill the mag as well, and stuff sprayed all over the place. I didn't do the superglue thing though. Link to post Share on other sites
Lon Posted December 17, 2006 Report Share Posted December 17, 2006 Duster gas is HFC134a, which is R-134a. It's all the same thing, but I still don't understand why the airsoft propellant needs to cost 5 times as much as duster. Agreed. So the tube fills the gun mag? I made something similar a few days ago, but the thing didn't fill the mag as well, and stuff sprayed all over the place. I didn't do the superglue thing though. <{POST_SNAPBACK}> Yep. At first I also tried it without the glue, and yeah, the stuff sprayed all over the place. Just apply a small bit of superglue around the gap between the tube and the hole and make sure it's totally dry before you attempt to fill, or you may get superglue on your fingers. Link to post Share on other sites
stew_b_10 Posted December 17, 2006 Report Share Posted December 17, 2006 ok thanks. with the picture it makes a lot more sense. by the tube the thing comes wit you mean the straw? and how did you taper it like that? did it already come like that or did you do it yourself? Link to post Share on other sites
Lon Posted December 17, 2006 Report Share Posted December 17, 2006 Yeah, straw's a better word. How did I taper it? It comes like that, fits perfect. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.