Marushin Raging Bull Review

Marushin RagingBull fault
review by Mark Saxby(aka Snowman)

	Stock Specifications
FPS	~1 Joule on HFC22
Length:	???
*Barrel Length:*	8 3/8 in
Weight:	820g
Ammo capacity:	6 rounds

Possible fault: If you have recently bought a Raging Bull and find that the power is very poor, or less gas than you expect is vented when you pull the trigger it's possible that you have one with a design fault in it. Marushin recently announced that a few may have got out into the world with a minor a fault in them. There's nothing to worry about though, as you'll see below

The fault is not common, and can be very simply rectified. I'll let Snowman take it from here. Arnie

"...I recently bought a Marushin 8mm Raging Bull. It is a lovely gun, but when I first recieved it mine did not release any gas when the trigger is pulled.

I took the side panel off and the problem appeared to be that part number 32 was not correctly positioned in relation to the trigger and the hammer. I couldn't see any broken parts.

I contacted Arnie for help, and as we were at a loss to explain the problem I got in contact with Marushin themselves.

Marushin's response was :

"..We are sorry for you are in trouble. We send you 3 photos and we wish they will help you.

Please check the other side of #32. If the shape of #83spring is like above one, it is OK. If like below one, the spring is not working and you have to replace new #83.

Maybe this is the reason for not releasing gas. We can send you #83 to you for free.If you need it, tell us your address. The rest of photos are how to adopt #32&83.

..."

The part arrived about a week after I requested, removal and refitting was simple enough with the photos provided.

by Mark Saxby(aka Snowman)

External Links: TBA

Site links: TBA

Comment on this article in the forums